•   Basics and Reporting on Manufacturing and Quality Technology 5K00DU88-3010 01.08.2021-18.12.2021  5 cr  (21I112B) +-
    Learning outcomes of the course unit
    Student:
    • knows the basics of the most important forms of production and manufacturing methods.
    • Have the capability to understand key manufacturing techniques and terms in them.
    • perceive the importance of production automation.
    • is familiar with the main quality technologies at a fundamental level.
    • is familiar with the most common engineering techniques and is able to perform measurements with basic measuring instruments
    • is able to evaluate his / her own written communication skills
    • Understand what appropriate communication is
    • take into account the requirements of the recipient, the situation and the field
    • develop written presentations for the target audience on measurement tasks
    • use the language of technical standards and language recommendations in speech and writing communications
    • Report engineering measurements in engineering
    • Performed workshop measurements
    • Draw up a test report in accordance with the task
    • Calculate the error estimates for the measurement task
    • Conduct a standard report as directed (TAMK Reporting Guidelines)
    Course contents
    • Production forms and their control, key machining methods, sheet metal work, coating methods, assembly, manufacturing automation,
    • Quality techniques, measurement, machine tool basic measurement equipment.
    • Engineering Engineering Measurements and Measurement Uncertainty Assessment, Reporting on Performed Measurement Tasks, Basics of Voice Communication
    • Teamwork • right language • document communication (TAMK's reporting instructions).
    Assessment criteria
    Satisfactory

    Is able to identify and define basic concepts related to the field. Performs assigned tasks as a wizard. Knows different procedures but may not be able to justify all their choices. Works as a member of the group for joint efforts. Identify your interpersonal skills. Identify important practices for your industry. Take responsibility for its own performance and is able to receive and give feedback.

    Good

    Strengthens the relationship between concepts in this field. Is able to choose the most appropriate procedure for the different options and justify their choice. Is able to cooperate responsibly and is ready to develop their interaction skills. Identify and follow important practices in your field. Takes responsibility and undertakes not only its own activities but also the activities of the group. Is able to give and receive feedback actively and constructively.

    Excellent

    Understands wide-ranging entities and their relationships. Can find different ways of working and solutions, justify their choices and try new ways of working. Evaluate different solution options and combine different solutions creatively or even innovate new solutions.

    Can work in a responsible, flexible and constructive way. Develops both your own and group interaction. Act responsibly and with commitment to the needs and needs of the community and industry. Uses constructive feedback systematically as a tool for self and community growth.

    Name of lecturer(s)

    Pauliina Paukkala

    Recommended or required reading

    Esitellään kurssin alussa
    Valmistustekniikan osalta:
    Moodlen opintomateriaali
    Valmistustekniika E.Ihalainen-K.Aaltonen et al. ja/tai
    Konetekniikan perusteet T. Keinänen-P. Kärkkäinen (not translated)

    Planned learning activities and teaching methods

    harjoitukset, lähiopetus, yhteistoiminnallinen oppiminen, harjoitustyöt, esitelmät (not translated)

    Assessment methods and criteria

    harjoitustyöt, esitelmät
    Valmistustekniikan osalta: tuntitehtävät, esitelmät, ryhmätehtävät, tentti
    Laatutekniikan, mittauksen ja raportoinnin osalta: Tuntitehtävät, kotitehtävät, mittausharjoitukset (läsnäolovaatimus), raportointi, tentti (not translated)

    Language of instruction

    Finnish

    Timing

    01.08.2021 - 18.12.2021

    Registration

    01.08.2021 - 12.09.2021

    Credits

    5 cr

    Group(s)

    21I112B

    Teacher(s)

    Pauliina Paukkala, Roope Siikanen, Mika Moisio

    Unit, in charge

    Mechanical Engineering

    Degree programme(s)

    Degree Programme in Mechanical Engineering

    Office

    TAMK Main Campus

    Evaluation scale

    0-5

    Completion alternatives

    TAMK hyväksilukumenettelyn mukaan. (not translated)

    Exam schedule

    Valmistustekniikan osalta tentti sovitaan ryhmän kanssa opintojakson alussa.

    Valmistustekniikan osalta uusintatentti järjestetään tarvittaessa. Ajankohta sovitaan joustavasti uusintatenttiin osallistujien kanssa. (not translated)

    Students use of time and load

    Opiskelijan tekemä työ 27h/op (not translated)

    Content periodicity

    Laatutekniikka, mittaus ja raportointi 3,5 op
    Valmistustekniikka 1,5 op (not translated)

    Assessment criteria
    Satisfactory

    Is able to identify and define basic concepts related to the field. Performs assigned tasks as a wizard. Knows different procedures but may not be able to justify all their choices. Works as a member of the group for joint efforts. Identify your interpersonal skills. Identify important practices for your industry. Take responsibility for its own performance and is able to receive and give feedback.

    Good

    Strengthens the relationship between concepts in this field. Is able to choose the most appropriate procedure for the different options and justify their choice. Is able to cooperate responsibly and is ready to develop their interaction skills. Identify and follow important practices in your field. Takes responsibility and undertakes not only its own activities but also the activities of the group. Is able to give and receive feedback actively and constructively.

    Excellent

    Understands wide-ranging entities and their relationships. Can find different ways of working and solutions, justify their choices and try new ways of working. Evaluate different solution options and combine different solutions creatively or even innovate new solutions.
    Can work in a responsible, flexible and constructive way. Develops both your own and group interaction. Act responsibly and with commitment to the needs and needs of the community and industry. Uses constructive feedback systematically as a tool for self and community growth.